Changes
From BrewWiki
Added note on starters
Glass carboys (or stainless) fermentors offer significant advantages over the typical plastic bucket. First they are much easier to clean and sterilize. Second, glass (or stainless) provides a 100% oxygen barrier, where plastic buckets are porous and can leak oxygen if stored for long periods. Third, plastic fermentors often have very poor seals around the top of the bucket and can leak in both directions making it difficult to determine when fermentation has actually completed. A 5 gallon glass carboy will do the job better, and is available at a very reasonable price from most stores.
==8. Make a Yeast Starter==While pitching directly from a tube or packet of liquid yeast is OK, your beer will ferment better if you make a yeast starter first. Boil up a small amount of dried malt extract in a quart of water with 1/4 oz of yeast. Cool it well and then pitch your yeast into it 2-3 days before you brew. Install some foil or an airlock over it and place it in a cool dark location. When brew day comes, pitching your starter will result in a quicker start and less risk of infection or off flavors. ==9. Make Long Term Purchases==
You may have started brewing with something really simple, but if you enjoy brewing and think you might stay with it, then you are best off making long term purchases rather than a series of short term purchases. For example, early on I bought a 3 gallon pot, then a 5 gallon pot, then an 8 gallon enamel pot and finally a 9 gallon stainless. It would have been much cheaper to jump to the 9 gallon stainless after the 3 gallon pot. Similarly I've had several sizes of immersion chillers, finally settling on a two stage 3/8" diameter copper coil. If you instead make long term purchases (a good pot, a good chiller, glass carboys, a nice mash tun/cooler) you will save a lot of money in the long run.
